Logo

Pillar guide

Chinese VIN Number Format Explained: Position-by-Position Guide

Learn how a Chinese VIN is built: the L prefix, manufacturer code, model year, plant and serial number. A clear position-by-position guide.

By China Car VIN Check · Updated · 3 min read

On this page

Quick answer: how a Chinese VIN is built

A Chinese VIN has 17 characters and follows the same international layout (ISO 3779) used worldwide. What makes it recognisable is the first character: cars built in China start with the letter L.

The 17 characters split into three blocks: the World Manufacturer Identifier (positions 1-3), the Vehicle Descriptor Section (positions 4-9) and the Vehicle Identifier Section (positions 10-17).

Position-by-position table

PositionWhat it tells youNotes for Chinese cars
1Country or region of manufactureL means China
2-3ManufacturerFor example LC0 and LGX are used by BYD, LGW by Great Wall (Haval), LB3 by Geely, LVV by Chery
4-8Vehicle descriptor: series, body, engine, restraint systemDefined by each maker, so codes differ from brand to brand
9Check digitA maths check that helps catch mistyped or invalid VINs
10Model yearLetter or number code, see the table below
11Assembly plantPlant codes are set by each manufacturer
12-17Production serial numberUnique to the individual car

Why the first letter is L

The first character of a VIN groups countries by region. Letters J to R are assigned to Asia, and L falls inside that block for China. The second and third characters then narrow it down to the maker, which is why a short code like LC0 can point to a single manufacturer.

Chinese-built cars from foreign brands also carry an L prefix. Some Volvo, Polestar and Buick models, for example, are assembled in China, so an L at the start does not always mean a Chinese brand.

Model year codes in position 10

Position 10 uses a repeating code. These are the recent values:

CodeModel year
L2020
M2021
N2022
P2023
R2024
S2025
T2026
V2027

Letters that never appear in a VIN

The letters I, O and Q are never used in a VIN because they look too much like 1 and 0. If a VIN you are shown contains one of them, it was probably mistyped or it is not genuine.

Why many VIN decoders fail on Chinese cars

The first three characters only name the maker. They do not name the model. The descriptor in positions 4-8 is defined by the maker, and the same descriptor can describe a different car at a different plant. A decoder built mainly around American or European data can therefore return nothing or the wrong trim.

A decoder that is built for Chinese-market data matches the full VIN against manufacturer records instead, which is how you get the exact trim, motor output, transmission and drivetrain.

What to do next

Find the 17 characters on the car, check that they match the registration papers, then run them through a Chinese-brand decoder. A free check shows the brand, model and year, and a full report adds specs, mileage and history.

Frequently asked questions

What does a Chinese VIN start with?

Cars built in China start with the letter L. The next two characters identify the manufacturer, for example LC0 or LGX for BYD and LB3 for Geely.

How many characters does a Chinese VIN have?

Seventeen. Modern road vehicles use the 17-character format defined in ISO 3779. A shorter number is usually incomplete or misread.

Can I find the model from the VIN alone?

Not from the first three characters. The model, trim and engine are encoded in the descriptor section and need to be matched against manufacturer data, which is what a specialist decoder does.

Is a VIN the same as a chassis number?

Yes. VIN, chassis number and frame number all refer to the same unique identifier.

Useful pages

Sources and further reading